ROTARY LATHE SPINDLELESS 5FT OR 9FT
Description
Using Mitsubishi Control System
Veneer thickness setting via dedicated servo motor.
Allowing for veneer thickness change within seconds
Using Nose Bar System for accurate veneer thickness.
Using Servo Motor system to adjust the Back Angle.
Using Hydraulic Knife Clamping System
Specifications
| PRE – Spindleless Rotary Peeling Lathe 9ft | |
| Model | SLK – 2600 / 5F |
| Max Cutting Length | 2,600 mm |
| Max Diameter of Log to be Peeled | Ø 480 mm |
| Diameter of Log after Peeled | Ø 60 mm |
| Range of Thickness of Veneer to be Peeled | 0.35 ~ 3.4 mm |
| (Dependent on wood species <650kg/m3) | |
| Feed Speed | 30 ~ 80 m/min |
| Knife & Feed Roll Motor Power | 11 kw x 04 = 44 kw |
| Feed Screw Servo Motor Power | 11 kw |
| Knife Roller Servo Motor Power | 3.50 kw |
| Nose Bar Servo Motor Power | 1.5 kw |
| Back Peeling Angle Adjustment Servo Motor Power | 1.5 kw |
| Hydraulic Power | 1.5 kw |
| Total Power | 63.0 kw |
| Size of lathe (L x W x H) | 4,600 x 2,200 x 1,900 mm |
| Net weight of lathe | Abt 13,500 Kg |
| PRE- Spindleless Rotary Peeling Lathe 5ft | |
| Model | SLK 1350 / 5F |
| Max Cutting Length | 1,350 mm |
| Max diameter of log to be peeled | Ø 480 mm |
| Diameter of log after peeled | Ø 60 mm |
| Range of thickness of veneer to be peeled
|
0.8 ~ 3.4 mm |
| (Dependent on wood species <650kg/m3) | |
| Feed speed | 30 ~ 80 m/min |
| Knife & Feed Rollers Motor Power | 4 x 7.5 = 30 kw |
| Feed Screw Motor Power | 7.0 kw (Servo Motor) |
| Knife Gap Setting Servo Motor Power | 3.5 kw |
| Nose Bar Servo Motor Power | 1.5 kW |
| Back Peeling Angle Adjustment Servo Motor Power | 1.5 kW |
| Hydraulic Motor Power | 1.5 kW |
| Total Motor Power | 45.0 kW |
| Size of lathe (L x W x H) | 3,350 x 2,200 x 1,900 mm |
| Net weight of lathe | Abt 12,000 kg |